• Integrated ESD protection circuits
– Up to ±15kV IEC Air Discharge without external devices
• Over-Voltage Protection circuit (OVP) protects the
VBUS pin from continuous DC voltages up to 30V
• Integrated USB Switch
– No degradation of Hi-Speed electrical characteristics
– Allows single USB port of connection by providing switching function for:
–Battery charging
–Stereo and mono/mic audio
–USB Full-Speed/Low-Speed data
• flexPWR® Technology
– Low current design ideal for battery powered
applications
– “Sleep” mode tri-states all ULPI pins and
places the part in a low current state
– 1.8V to 3.3V IO Voltage (±10%)
• Integrated battery to 3.3V regulator
– 2.2uF bypass capacitor
– 100mV dropout voltage
• “Wrapper-less” design for optimal timing performance and design ease
– Low Latency Hi-Speed Receiver (43 HiSpeed clocks Max) allows use of legacy
UTMI Links with a ULPI bridge
• Selectable Reference Clock Frequency
– Frequencies: 12, 13, 19.2, 24, 26, 27, 38.4,
52 or 60MHz – pin selectable
• External Reference Clock operation available
– ULPI Input Clock Mode (60MHz sourced by
Link)
– 0 to 3.6V input drive tolerant
– Able to accept “noisy” clock sources as reference to internal, low-jitter PLL
• Internal Oscillator operation available
• This mode requires external Quartz Crystal or
Ceramic Resonator
• Smart detection circuits allow identification of
USB charger, headset, or data cable insertion
• Includes full support for the optional On-The-Go
(OTG) protocol detailed in the On-The-Go Supplement Revision 2.0 specification
• Supports Headset Audio Mode
• Supports the OTG Host Negotiation Protocol
(HNP) and Session Request Protocol (SRP)
• UART mode for non-USB serial data transfers
• Internal 5V cable short-circuit protection of ID, DP
and DM lines to VBUS or ground
• Industrial Operating Temperature -40C to +85C
• 32-pin, QFN RoHS Compliant Package
(5 x 5 x 0.90 mm height)