• pic_02

    Cart
  • pic_02

    Login

    FT232HL-REEL

    The FT232H is a single channel USB 2.0 Hi-Speed
    (480Mb/s) to UART/FIFO IC. It has the capability of
    being configured in a variety of industry standard
    serial or parallel interfaces.

    The FT232H requires USB device drivers (listed below), available free from http://www.ftdichip.com, to
    operate. The VCP version of the driver creates a Virtual COM Port allowing legacy serial port applications
    to operate over USB e.g. serial emulator application TTY. Another FTDI USB driver, the D2XX driver, can
    also be used with application software to directly access the FT232H through a DLL.

    Category:

    Download Details PDF
    Notice:

    In stock will ship in 2 days. Real-time inventory pls confirm with us.

    INQUIRY ONLINE




      SPECIFICATION

      • Single channel USB to serial / parallel ports
      with a variety of configurations.
      • Entire USB protocol handled on the chip. No
      USB specific firmware programming required.
      • USB 2.0 Hi-Speed (480Mbits/Second) and Full
      Speed (12Mbits/Second) compatible.
      • Multi-Protocol Synchronous Serial Engine
      (MPSSE) to simplify synchronous serial protocol
      (USB to JTAG, I2C, SPI (MASTER) or bit-bang)
      design.
      • UART transfer data rate up to 12Mbaud.
      (RS232 Data Rate limited by external level
      shifter).
      • USB to asynchronous 245 FIFO mode for
      transfer data rate up to 8 Mbyte/Sec.
      • USB to synchronous 245 parallel FIFO mode for
      transfers up to 40 Mbytes/Sec
      • Supports a proprietary half duplex FT1248
      interface with a configurable width, bidirectional data bus (1, 2, 4 or 8 bits wide).
      • CPU-style FIFO interface mode simplifies CPU
      interface design.
      • Fast serial interface option.
      • FTDI’s royalty-free Virtual Com Port (VCP) and
      Direct (D2XX) drivers eliminate the
      requirement for USB driver development in
      most cases.
      • Adjustable receive buffer timeout.
      • Option for transmit and receive LED drive
      signals.
      • Bit-bang Mode interface option with RD# and
      WR# strobes
      • Highly integrated design includes 5V to
      3.3/+1.8V LDO regulator for VCORE, integrated
      POR function
      • Asynchronous serial UART interface option with
      full hardware handshaking and modem
      interface signals.
      • Fully assisted hardware or X-On / X-Off
      software handshaking.
      • UART Interface supports 7/8 bit data, 1/2 stop
      bits, and Odd/Even/Mark/Space/No Parity.
      • Auto transmit enable control for RS485 serial
      applications using the TXDEN pin.
      • Operational mode configuration and USB
      Description strings configurable in external
      EEPROM over the USB interface.
      • Configurable I/O drives strength (4, 8, 12 or
      16mA) and slew rate.
      • Low operating and USB suspend current.
      • Supports self-powered, bus powered and highpower bus powered USB configurations.
      • UHCI/OHCI/EHCI host controller compatible.
      • USB Bulk data transfer mode (512 byte packets
      in Hi-Speed mode).
      • +1.8V (chip core) and +3.3V I/O interfacing
      (+5V Tolerant).
      • Extended -40°C to 85°C industrial operating
      temperature range.
      • Compact 48-pin Lead Free LQFP or QFN
      package
      • Configurable ACBUS I/O pins.