74ALVC164245DGG

The 74ALVC164245 is a high-performance, low-power, low-voltage, Si-gate CMOS device,
superior to most advanced CMOS compatible TTL families.
The 74ALVC164245 is a 16-bit (dual octal) dual supply translating transceiver featuring
non-inverting 3-state bus compatible outputs in both send and receive directions. It is designed to
interface between a 3 V and 5 V bus in a mixed 3 V and 5 V supply environment.
This device can be used as two 8-bit transceivers or one 16-bit transceiver.
The direction control inputs (1DIR and 2DIR) determine the direction of the data flow.
nDIR (active HIGH) enables data from nAn ports to nBn ports. nDIR (active LOW) enables data
from nBn ports to nAn ports. The output enable inputs (1OE and 2OE), when HIGH, disable both
nAn and nBn ports by placing them in a high-impedance OFF-state. Pins nAn, nOE and nDIR are
referenced to VCC(A) and pins nBn are referenced to VCC(B).
In suspend mode, when one of the supply voltages is zero, there will be no current flow from the
non-zero supply towards the zero supply. The nAn-outputs must be set 3-state and the voltage on
the A-bus must be smaller than Vdiode (typical 0.7 V). VCC(B) ≥ VCC(A) (except in suspend mode)


Download Details PDF

Notice:

In stock will ship in 2 days. Real-time inventory pls confirm with us.

INQUIRY ONLINE




    SPECIFICATION

    • Wide supply voltage range:
    • 3 V port (VCC(A)): 1.5 V to 3.6 V
    • 5 V port (VCC(B)): 1.5 V to 5.5 V
    • CMOS low power consumption
    • Overvoltage tolerant inputs to 5.5 V
    • Direct interface with TTL levels
    • IOFF circuitry provides partial Power-down mode operation
    • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
    • Control inputs voltage range from 2.7 V to 5.5 V
    • High-impedance outputs when VCC(A) or VCC(B) = 0 V
    • Complies with JEDEC standards:
    • JESD8-7 (1.65 V to 1.95 V)
    • JESD8-5 (2.3 V to 2.7 V)
    • JESD8C (2.7 V to 3.6 V)
    • ESD protection:
    • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V
    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V
    • Specified from -40 °C to +85 °C and -40 °C to +125 °C