UCLAMP3331ZATFT

µClamp® TVS diodes are designed to protect sensitive
electronics from damage or latch-up due to ESD. They
are designed to replace multilayer varistors (MLVs) in
portable applications such as cell phones, notebook
computers, and other portable electronics. TVS diodes
offer desirable characteristics for board level protection
including fast response time, low operating and
clamping voltage, and no device degradation.
µClamp®3331ZA features extremely good ESD protection
characteristics highlighted by extremely low dynamic
resistance, low peak ESD clamping voltage, and high ESD
withstand voltage (+/-30kV contact per IEC 61000-4-2).
Each device will protect one data or power line operating
at 3.3 Volts.
µClamp3331ZA is in a 2-pin SLP0603P2X3F package
measuring 0.6 x 0.3 mm with a nominal height of only
0.25mm. Leads are finished with NiAu. The small
package gives the designer the flexibility to protect
single lines in applications where arrays are not
practical. The combination of small size and high ESD
surge capability makes them ideal for use in portable
applications such as cellular phones and wearables.