• pic_02

    Cart
  • pic_02

    Login

    NRF9160-SICA-B1A-R

    The nRF9160 is a low-power cellular IoT (Internet of Things) solution, integrating an ARM®
    Cortex®
    -M33
    processor with advanced security features, a range of peripherals, as well as a complete LTE modem
    compliant with 3GPP LTE release 13 Cat-M1 and Cat-NB1, and 3GPP LTE release 14 Cat-NB1 and Cat-NB2
    standards.
    The ARM Cortex-M33 processor is exclusively for user application software, and it offers 1 MB of flash
    and 256 kB of RAM dedicated to this use. The M33 application processor shares the power, clock and
    peripheral architecture with Nordic Semiconductor nRF51 and nRF52 Series of PAN/LAN SoCs, ensuring
    minimal porting efforts.
    The peripheral set offers a variety of analog and digital functionality enabling single-chip implementation
    of a wide range of cellular IoT (Internet of Things) applications. ARM TrustZone technology, Cryptocell 310
    and supporting blocks for system protection and key management, are embedded to enable advanced
    security needed for IoT applications.
    The LTE modem integrates a very flexible transceiver that in hardware supports frequency range from
    700 to 2200 MHz (through a single 50 Ω antenna pin), and a baseband processor handling LTE Cat-M1/
    NB1/NB2 protocol layers L1-L3 as well as IP upper layers offering secure socket API for the application. The
    modem is supported by pre-qualified software builds available for free from Nordic Semiconductor.
    On specific nRF9160 device variants, the LTE modem supports A-GPS operation during sleep intervals in
    the LTE operation (RRC idle and PSM modes).

    Category:

    Download Details PDF
    Notice:

    In stock will ship in 2 days. Real-time inventory pls confirm with us.

    INQUIRY ONLINE




      SPECIFICATION

      Microcontroller:
      • ARM Cortex -M33
      • 243 EEMBC CoreMark score running from flash memory
      • Data watchpoint and trace (DWT), embedded trace macrocell (ETM), and
      instrumentation trace macrocell (ITM)
      • Serial wire debug (SWD)
      • Trace port
      • 1 MB flash
      • 256 kB low leakage RAM
      • ARM Trustzone
      • ARM Cryptocell 310
      • Up to 4x SPI master/slave with EasyDMA
      • Up to 4x I2C compatible two-wire master/slave with EasyDMA
      • Up to 4x UART (CTS/RTS) with EasyDMA
      • I2S with EasyDMA
      • Digital microphone interface (PDM) with EasyDMA
      • 4x pulse width modulator (PWM) unit with EasyDMA
      • 12-bit, 200 ksps ADC with EasyDMA – eigth configurable channels with
      programmable gain
      • 3x 32-bit timer with counter mode
      • 2x real-time counter (RTC)
      • Programmable peripheral interconnect (PPI)
      • 32 general purpose I/O pins
      • Single supply voltage: 3.0 – 5.5 V
      • All necessary clock sources integrated
      • Package: 10 × 16 x 1.04 mm LGA
      LTE modem:
      • Transceiver and baseband
      • 3GPP LTE release 13 Cat-M1 and Cat-NB1 compliant
      • 3GPP release 13 coverage enhancement
      • 3GPP LTE release 14 Cat-NB2 compliant
      • GPS receiver
      • GPS L1 C/A supported
      • RF transceiver for global coverage
      • Up to 23 dBm output power
      • -108 dBm sensitivity (LTE-M) for low band, -107 dBm for mid
      band
      • Single 50 Ω antenna interface
      • LTE band support in hardware:
      • Cat-M1: B1, B2, B3, B4, B5, B8, B12, B13, B14, B17, B18, B19,
      B20, B25, B26, B28, B66
      • Cat-NB1/NB2: B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20,
      B25, B26, B28, B66
      • Supports SIM and eSIM with an ETSI TS 102 221 compatible UICC
      interface
      • Power saving features: DRX, eDRX, PSM
      • IP v4/v6 stack
      • Secure socket (TLS/DTLS) API
      Current consumption @ 3.7 V:
      • Power saving mode (PSM) floor current: 2.7 µA
      • eDRX @ 82.91s: 18 µA in Cat-M1, 37 µA in Cat-NB1 (UICC included)