TPS65296RJER

The TPS65296 device provides a complete power
solution for LPDDR4/LPDDR4X memory system with
the lowest total cost and minimum space. It meets the
JEDEC standard for LPDDR4/LPDDR4X power-up
and power-down sequence requirement. The
TPS65296 integrates two synchronous buck
converters (VDD1 and VDD2) and a 1.5-A LDO
(VDDQ).
The TPS65296 employs D-CAP3™ mode with 600-
kHz switching frequency for fast transient, good load/
line regulation, and support for ceramic output
capacitors without an external compensation circuit.
The TPS65296 provides rich functions as well as
good efficiency with internal low Rdson power
MOSFETs. It supports flexible power state control,
placing VDDQ at high-Z in S3 and discharging VDD1,
VDD2, and VDDQ in S4/S5 state. Full protection
features include OVP, UVP, OCP, UVLO and thermal
shutdown protection. The part is available in a
thermally enhanced 18-pin HotRod™ VQFN package
and is designed to operate under the –40°C to 125°C
junction temperature range.


Download Details PDF

Notice:

In stock will ship in 2 days. Real-time inventory pls confirm with us.

INQUIRY ONLINE




    SPECIFICATION

    • Synchronous buck converter (VDD2)
    – Input voltage range: 4.5 V to 18 V
    – Output voltage fixed at 1.1 V
    – D-CAP3™ mode control for fast transient
    response
    – Continual output current: 8 A
    – Advanced Eco-mode™ pulse skip
    – Integrated 22-mΩ / 8.6-mΩ RDS(on) internal
    power switch
    – 600-kHz switching frequency
    – Internal soft start: 1.6 ms
    – Cycle-by-cycle overcurrent protection
    – Latched output OV/UV protections
    • Synchronous buck converter (VDD1)
    – Input voltage range: 3 V to 5.5 V
    – Output voltage fixed at 1.8 V
    – D-CAP3™ mode control for fast transient
    response
    – Continual output current: 1 A
    – Advanced Eco-mode™ pulse skip
    – Integrated 150-mΩ /120-mΩ RDS(on) internal
    power switch
    – 580-kHz switching frequency
    – Internal soft start: 1 ms
    – Cycle-by-cycle overcurrent protection
    – Latched output OV/UV protections
    • 1.5-A LDO (VDDQ)
    – 1.5-A continual output current
    – Requires only 10 μF of ceramic output
    capacitor
    – Support high-Z in S3
    – ±30-mV VDDQ output accuracy (DC+AC)
    • Low quiescent current: 150 µA
    • Power good indicator
    • Output discharge function
    • Power up and power down sequencing control
    • Non-latch for OT and UVLO protections
    • 18-pin 3.0-mm × 3.0-mm HotRod™ VQFN package