• pic_02

    Cart
  • pic_02

    Login

    STM8S003F3P6TR

    The STM8S003F3/K3 value line 8-bit microcontrollers offer 8 Kbytes of Flash program
    memory, plus integrated true data EEPROM. They are referred to as low-density devices in
    the STM8S microcontroller family reference manual (RM0016).
    The STM8S003F3/K3 value line devices provide the following benefits: performance,
    robustness and reduced system cost.
    Device performance and robustness are ensured by true data EEPROM supporting up to
    100000 write/erase cycles, advanced core and peripherals made in a state-of-the-art
    technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate
    clock source, and a clock security system.
    The system cost is reduced thanks to a high system integration level with internal clock
    oscillators, watchdog, and brown-out reset.
    Full documentation is offered as well as a wide choice of development tools.

    Category:

    Download Details PDF
    Notice:

    In stock will ship in 2 days. Real-time inventory pls confirm with us.

    INQUIRY ONLINE




      SPECIFICATION

      Core
      • 16 MHz advanced STM8 core with Harvard
      architecture and 3-stage pipeline
      • Extended instruction set
      Memories
      • Program memory: 8 Kbyte Flash memory; data
      retention 20 years at 55 °C after 100 cycles
      • RAM: 1 Kbyte
      • Data memory: 128 bytes true data EEPROM;
      endurance up to 100 k write/erase cycles
      Clock, reset and supply management
      • 2.95 V to 5.5 V operating voltage
      • Flexible clock control, 4 master clock sources
      – Low-power crystal resonator oscillator
      – External clock input
      – Internal, user-trimmable 16 MHz RC
      – Internal low-power 128 kHz RC
      • Clock security system with clock monitor
      • Power management
      – Low-power modes (wait, active-halt, halt)
      – Switch-off peripheral clocks individually
      – Permanently active, low-consumption
      power-on and power-down reset
      Interrupt management
      • Nested interrupt controller with 32 interrupts
      • Up to 27 external interrupts on 6 vectors
      Timers
      • Advanced control timer: 16-bit, 4 CAPCOM
      channels, 3 complementary outputs, dead-time
      insertion and flexible synchronization
      • 16-bit general purpose timer, with 3 CAPCOM
      channels (IC, OC or PWM)
      • 8-bit basic timer with 8-bit prescaler
      • Auto wakeup timer
      • Window and independent watchdog timers
      Communications interfaces
      • UART with clock output for synchronous
      operation, SmartCard, IrDA, LIN master mode
      • SPI interface up to 8 Mbit/s
      • I
      2C interface up to 400 Kbit/s
      Analog to digital converter (ADC)
      • 10-bit ADC, ± 1 LSB ADC with up to 5
      multiplexed channels, scan mode and analog
      watchdog
      I/Os
      • Up to 28 I/Os on a 32-pin package including 21
      high-sink outputs
      • Highly robust I/O design, immune against
      current injection
      Development support
      • Embedded single-wire interface module
      (SWIM) for fast on-chip programming and nonintrusive debugging