XFL4020-222MEC

Designer’s Kit C436 contains 5 each of all values
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Core material Composite
Core and winding loss See www.coilcraft.com/coreloss
Weight 158 – 169 mg
Operating voltage 0 – 20 V
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 2.3 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.

Category:

Download Details PDF

Notice:

In stock will ship in 2 days. Real-time inventory pls confirm with us.

INQUIRY ONLINE




    SPECIFICATION

    Termination: E = RoHS compliant tin-silver over copper.
    Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
    Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel).
    Quantities less than full reel available: in tape (not machine ready) or with leader
    and trailer ($25 charge).
    B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter
    of your part number from B to C.
    D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not
    stocked (3500 parts per full reel).
    2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
    3. DCR measured on a micro-ohmmeter.
    4. SRF measured using Agilent/HP 4395A or equivalent.
    5. DC current at 25°C that causes the specified inductance drop from its value without current.
    Click for temperature derating information.
    6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
    and does not represent absolute maximum ratings. Click for temperature derating information.
    7. Electrical specifications at 25°C.
    Refer to Doc 362 “Soldering Surface Mount Components” before soldering.