WM8960CGEFL/V

The WM8960 is a low power, high quality stereo CODEC
designed for portable digital audio applications.
Stereo class D speaker drivers provide 1W per channel into 8
loads with a 5V supply. Low leakage, excellent PSRR and
pop/click suppression mechanisms also allow direct battery
connection to the speaker supply. Flexible speaker boost
settings allow speaker output power to be maximised while
minimising other analogue supply currents.
A highly flexible input configuration for up to three stereo
sources is integrated, with a complete microphone interface.
External component requirements are reduced as no separate
microphone, speaker or headphone amplifiers are required.
Advanced on-chip digital signal processing performs automatic
level control for the microphone or line input.
Stereo 24-bit sigma-delta ADCs and DACs are used with low
power over-sampling digital interpolation and decimation filters
and a flexible digital audio interface.
The master clock can be input directly or generated internally by
an onboard PLL, supporting most commonly-used clocking
schemes.
The WM8960 operates at analogue supply voltages down to
2.7V, although the digital supplies can operate at voltages down
to 1.71V to save power. The speaker supply can operate at up
to 5.5V, providing 1W per channel into 8 loads. Unused
functions can be disabled using software control to save power.
The WM8960 is supplied in a very small and thin 5x5mm QFN
package, ideal for use in hand-held and portable systems.


Download Details PDF

Notice:

In stock will ship in 2 days. Real-time inventory pls confirm with us.

INQUIRY ONLINE




    SPECIFICATION

     DAC SNR 98dB (‘A’ weighted), THD -84dB at 48kHz, 3.3V
     ADC SNR 94dB (‘A’ weighted), THD -82dB at 48kHz, 3.3V
     Pop and click suppression
     3D Enhancement
     Stereo Class D Speaker Driver
    – <0.1% THD with 1W per channel into 8 BTL speakers
    – 70dB PSRR @217Hz
    – 87% efficiency (1W output)
    – Flexible internal switching clock
     On-chip Headphone Driver
    – 40mW output power into 16 at 3.3V
    – Capless mode support
    – THD -75dB at 20mW, SNR 90dB with 16 load
     Microphone Interface
    – Pseudo differential for high noise immunity
    – Integrated low noise MICBIAS
    – Programmable ALC / Limiter and Noise Gate
     Low Power Consumption
     Low Supply Voltages
    – Analogue 2.7V to 3.6V (Speaker supply up to 5.5V)
    – Digital core and I/O: 1.71V to 3.6V
     On-chip PLL provides flexible clocking scheme
     Sample rates: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48
     5x5x0.9mm QFN package