DSPIC33FJ64GP802-IMM

Operating Conditions
• 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
• 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
Clock Management
• 2% internal oscillator
• Programmable PLL and oscillator clock sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer
• Low-power management modes
• Fast wake-up and start-up
Core Performance
• Up to 40 MIPS 16-bit dsPIC33F CPU
• Single-cycle MUL plus hardware divide
Advanced Analog Features
• 10/12-bit ADC with 1.1Msps/500 ksps rate:
– Up to 13 ADC input channels and four S&H
– Flexible/Independent trigger sources
• 150 ns Comparators:
– Up to two Analog Comparator modules
– 4-bit DAC with two ranges for Analog Comparators
Input/Output
• Software remappable pin functions
• 5V-tolerant pins
• Selectable open drain and internal pull-ups
• Up to 5 mA overvoltage clamp current/pin
• Multiple external interrupts
System Peripherals
• 16-bit dual channel 100 ksps Audio DAC
• Cyclic Redundancy Check (CRC) module
• Up to five 16-bit and up to two 32-bit Timers/
Counters
• Up to four Input Capture (IC) modules
• Up to four Output Compare (OC) modules
• Real-Time Clock and Calendar (RTCC) module
Communication Interfaces
• Parallel Master Port (PMP)
• Two UART modules (10 Mbps)
– Supports LIN 2.0 protocols
– RS-232, RS-485, and IrDA® support
• Two 4-wire SPI modules (15 Mbps)
• Enhanced CAN (ECAN) module (1 Mbaud) with
2.0B support
• I2C module (100K, 400K and 1Mbaud) with
SMbus support
• Data Converter Interface (DCI) module with I2S
codec support
Direct Memory Access (DMA)
• 8-channel DMA with no CPU stalls or overhead
• UART, SPI, ADC, ECAN, IC, OC, INT0
Qualification and Class B Support
• AEC-Q100 REVG (Grade 0 -40ºC to +150ºC)
• Class B Safety Library, IEC 60730, VDE certified
Debugger Development Support
• In-circuit and in-application programming
• Two program breakpoints
• Trace and run-time watch