PTN5150AHXMP

 Support type C connector with existing chipsets
 USB Type-C Rev 1.1 compliance
 Compatible with legacy OTG hardware and software
 Support plug, orientation, role and charging current detection.
 USB-ID pin for OTG application
 I
2C-bus interface support for fast mode
 EXT_SEL to control USB data switch
 CC control logic detection and indication
 PORT input pin to configure in DRP (Hi-Z), UFP (low) or DFP (high)
 Current mode detection when PTN5150A is operating under UFP (device) role:
default current mode (<0.5 A/0.9 A); medium current mode (<1.5 A); high current
mode (<3.0 A)
 Integrated accurate Rp current sources to support default mode and high current
mode under host mode: default current mode at 80 A; medium current mode at
180 A; high current mode at 330 A
 Integrate Rd resistor in UFP device mode
 Report detail port states and accessory modes in I2C registers
 Support VCONN1/2 power detected status through VCONN Status I2C register
0AH
 Current consumption:
 Standby in DRP mode: 15 A

 Standby in DFP mode: 15 A
 Standby in UFP mode: 15 A
 Power supply: VDD=2.7 V to 5.5 V
 VBUS_DET: 28 V Absolute Max Tolerance
 High ESD protection for VBUS and CC1/2 pins
 ESD protection exceeds 7000 V HBM per JDS-001-2012 and 500 V CDM per
JESD22-C101
 Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
 Operating Temperature Range: 40 C to +85 C
 X2QFN12 package 1.6 mm  1.6 mm  0.35 mm, 0.4 mm pitch